{"id":18945,"date":"2026-01-22T06:30:41","date_gmt":"2026-01-22T06:30:41","guid":{"rendered":"https:\/\/www.zmdetech.com\/?p=18945"},"modified":"2026-05-06T01:34:02","modified_gmt":"2026-05-06T01:34:02","slug":"securite-du-soudage-installation-de-la-gaine-et-reglage-de-la-saillie-de-la-pointe-de-contact-reglage-precis-pour-une-alimentation-en-douceur-weldsafe-essentials-12","status":"publish","type":"post","link":"https:\/\/www.zmdetech.com\/fr\/connaissances\/securite-du-soudage-installation-de-la-gaine-et-reglage-de-la-saillie-de-la-pointe-de-contact-reglage-precis-pour-une-alimentation-en-douceur-weldsafe-essentials-12\/","title":{"rendered":"S\u00e9curit\u00e9 en soudage : Installation de la gaine et r\u00e9glage de la saillie de la pointe de contact - R\u00e9glage pr\u00e9cis pour une alimentation en douceur (WeldSafe Essentials 12)"},"content":{"rendered":"

L'installation correcte de la gaine de la torche MIG et la saillie correcte de l'embout de contact sont des \u00e9tapes finales essentielles de l'assemblage de la torche. Un manchon mal align\u00e9 ou une longueur de pointe incorrecte entra\u00eene des probl\u00e8mes d'alimentation, une instabilit\u00e9 de l'arc, une usure pr\u00e9matur\u00e9e et une mauvaise qualit\u00e9 de soudure. En WeldSafe Essentials #12<\/em>, Dans ce chapitre, nous abordons la m\u00e9thode de rotation dans le sens des aiguilles d'une montre pour l'insertion de la gaine et la longueur de saillie recommand\u00e9e (L) pour la pointe de contact en fonction de la longueur du c\u00e2ble de la torche.<\/p>\n

\u00c9tape 1 : Installation correcte de la doublure<\/h2>\n

Pour ins\u00e9rer la gaine en douceur dans le c\u00e2ble de la torche :<\/p>\n

    \n
  1. Alignez la gaine avec l'entr\u00e9e du c\u00e2ble de la torche.<\/li>\n
  2. Tournez le c\u00e2ble de la torche dans le sens des aiguilles d'une montre<\/strong> (en suivant la direction de la fl\u00e8che indiqu\u00e9e sur de nombreuses torches) tout en douceur poussant<\/strong> le paquebot vers l'avant.\n
      \n
    • La torsion dans le sens des aiguilles d'une montre permet \u00e0 la gaine de suivre la spirale naturelle du c\u00e2ble sans s'entortiller ni se coincer.<\/li>\n
    • Continuez jusqu'\u00e0 ce que la gaine s'appuie compl\u00e8tement sur la but\u00e9e interne ou le diffuseur (reportez-vous au manuel de votre torche pour conna\u00eetre la position exacte de la gaine).<\/li>\n<\/ul>\n<\/li>\n<\/ol>\n
      \n
      \n
      \"\"<\/div>\n<\/div>\n
      \n
      \"\"<\/div>\n<\/div>\n<\/div>\n

      Cette technique permet d'\u00e9viter les dommages dus \u00e0 la torsion et de s'assurer que le liner reste droit pour une r\u00e9sistance minimale.<\/p>\n

      \u00c9tape 2 : D\u00e9coupage de la pointe de contact<\/h2>\n

      Les nouvelles pointes de contact sont souvent livr\u00e9es plus longues que n\u00e9cessaire pour s'adapter \u00e0 diff\u00e9rentes configurations :<\/p>\n

        \n
      • Reportez-vous au manuel de votre chalumeau ou de votre soudeur<\/strong> pour conna\u00eetre la longueur de saillie exacte recommand\u00e9e.<\/li>\n
      • Coupez la pointe \u00e0 la bonne longueur \u00e0 l'aide d'un cutter ou d'une scie \u00e0 m\u00e9taux.<\/li>\n
      • Lisser l'extr\u00e9mit\u00e9 coup\u00e9e<\/strong> avec du papier de verre fin ou une lime pour \u00e9liminer les bavures - les ar\u00eates vives peuvent raser le fil ou provoquer un contact irr\u00e9gulier.<\/li>\n<\/ul>\n

        Une pointe correctement taill\u00e9e assure un collage optimal, un bon contact \u00e9lectrique et emp\u00eache l'accumulation excessive d'\u00e9claboussures.<\/p>\n

        \n
        \n
        \"\"\"\"<\/div>\n<\/div>\n
        \n
        <\/div>\n<\/div>\n<\/div>\n

        Longueur de saillie de la pointe de contact recommand\u00e9e (L)<\/h2>\n

        La longueur de saillie L (distance entre l'extr\u00e9mit\u00e9 de la buse et l'extr\u00e9mit\u00e9 de l'embout) varie en fonction de la longueur du c\u00e2ble de la torche afin de maintenir une bonne adh\u00e9rence du fil et une bonne couverture de gaz :<\/p>\n

        \n
        \n
        <\/div>\n<\/div>\n
        \n
        <\/div>\n\n\n\n\n\n\n\n
        Longueur du c\u00e2ble de la torche (m)<\/th>\nSaillie recommand\u00e9e L (mm)<\/th>\n<\/tr>\n<\/thead>\n
        3<\/td>\n7-10<\/td>\n<\/tr>\n
        4.5<\/td>\n9-12<\/td>\n<\/tr>\n
        6<\/td>\n11-14<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
        <\/div>\n<\/div>\n<\/div>\n
          \n
        • Les c\u00e2bles plus courts ont besoin de moins de protub\u00e9rance ; les c\u00e2bles plus longs en ont besoin de plus pour compenser la courbure naturelle du fil et maintenir la stabilit\u00e9 de l'arc.<\/li>\n
        • Mesurez toujours L apr\u00e8s l'installation et ajustez si n\u00e9cessaire.<\/li>\n<\/ul>\n

          Liste de contr\u00f4le pour l'installation rapide<\/h2>\n
            \n
          • Tournez le c\u00e2ble de la torche dans le sens des aiguilles d'une montre tout en poussant la gaine jusqu'\u00e0 ce qu'elle soit compl\u00e8tement en place.<\/li>\n
          • Ajustez la pointe du contact pour qu'elle corresponde au tableau de longueur du c\u00e2ble<\/li>\n
          • Poncez\/limez l'extr\u00e9mit\u00e9 coup\u00e9e pour qu'elle soit lisse (sans bavures).<\/li>\n
          • V\u00e9rifier que l'embout s'ins\u00e8re bien dans le diffuseur\/la buse.<\/li>\n
          • Testez le fil d'alimentation manuellement : il doit se d\u00e9placer librement sans r\u00e9sistance.<\/li>\n<\/ul>\n

            La pr\u00e9cision dans les derniers centim\u00e8tres<\/h2>\n

            La rotation dans le sens des aiguilles d'une montre lors de l'insertion de la gaine et la saillie pr\u00e9cise de la pointe de contact sont de petits d\u00e9tails qui donnent de grands r\u00e9sultats : alimentation r\u00e9guli\u00e8re du fil, arcs stables et dur\u00e9e de vie prolong\u00e9e des consommables. Suivez la fl\u00e8che, mesurez L avec pr\u00e9cision et \u00e9bavurez les bords - vos soudures vous remercieront.<\/p>\n

            Vos probl\u00e8mes d'alimentation ont-ils \u00e9t\u00e9 r\u00e9solus par une simple rotation du liner ou une coupe de l'embout ? Partagez vos conseils ci-dessous.<\/p>","protected":false},"excerpt":{"rendered":"

            Installez le rev\u00eatement de la torche MIG en faisant tourner le c\u00e2ble dans le sens des aiguilles d'une montre (sens de la fl\u00e8che) tout en le poussant ; coupez les nouvelles pointes de contact \u00e0 la bonne longueur (7-14 mm de saillie pour un c\u00e2ble de 3-6 m) et lissez les extr\u00e9mit\u00e9s. Etapes essentielles pour un d\u00e9vidage fiable du fil. WeldSafe Essentials #12<\/p>","protected":false},"author":1,"featured_media":18951,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[181,260],"tags":[241,296,261,240,238,266,301,298,297,258,242,299,300,262,239,236,265,259,237,234,235,191,302],"class_list":["post-18945","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-knowledge","category-welding-safety","tag-carbon-monoxide","tag-co2","tag-electrocution","tag-environment","tag-essentials","tag-grounding","tag-liner","tag-location","tag-mag","tag-mig","tag-oxygen-deficiency","tag-power-cabinet","tag-power-supply","tag-prevention","tag-protection","tag-safety","tag-tape","tag-tig","tag-tutorial","tag-weld","tag-welder","tag-welding","tag-wire"],"yoast_head":"\nWelding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12) - ZMDE Steel Machinery<\/title>\n<meta name=\"description\" content=\"Install MIG torch liner by rotating cable clockwise (arrow direction) while pushing; trim new contact tips to proper length (7\u201314 mm protrusion based on 3\u20136 m cable) and smooth ends. Essential steps for reliable wire feeding. WeldSafe Essentials #12\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.zmdetech.com\/fr\/connaissances\/securite-du-soudage-installation-de-la-gaine-et-reglage-de-la-saillie-de-la-pointe-de-contact-reglage-precis-pour-une-alimentation-en-douceur-weldsafe-essentials-12\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12)\" \/>\n<meta property=\"og:description\" content=\"Install MIG torch liner by rotating cable clockwise (arrow direction) while pushing; trim new contact tips to proper length (7\u201314 mm protrusion based on 3\u20136 m cable) and smooth ends. Essential steps for reliable wire feeding. WeldSafe Essentials #12\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.zmdetech.com\/fr\/connaissances\/securite-du-soudage-installation-de-la-gaine-et-reglage-de-la-saillie-de-la-pointe-de-contact-reglage-precis-pour-une-alimentation-en-douceur-weldsafe-essentials-12\/\" \/>\n<meta property=\"og:site_name\" content=\"ZMDE Steel Machinery\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/facebook.com\/zmdemachinery\" \/>\n<meta property=\"article:published_time\" content=\"2026-01-22T06:30:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-06T01:34:02+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.zmdetech.com\/wp-content\/uploads\/man-with-weld-gun.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"811\" \/>\n\t<meta property=\"og:image:height\" content=\"540\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"ZMDE\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@zmdemachinery\" \/>\n<meta name=\"twitter:site\" content=\"@zmdemachinery\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"ZMDE\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/\"},\"author\":{\"name\":\"ZMDE\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/person\\\/96fc127d8fb2582a2873adc1bef0492d\"},\"headline\":\"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12)\",\"datePublished\":\"2026-01-22T06:30:41+00:00\",\"dateModified\":\"2026-05-06T01:34:02+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/\"},\"wordCount\":432,\"publisher\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/man-with-weld-gun.webp\",\"keywords\":[\"carbon monoxide\",\"CO2\",\"Electrocution\",\"Environment\",\"Essentials\",\"grounding\",\"liner\",\"Location\",\"MAG\",\"MIG\",\"oxygen deficiency\",\"Power Cabinet\",\"Power Supply\",\"Prevention\",\"Protection\",\"safety\",\"tape\",\"TIG\",\"tutorial\",\"weld\",\"welder\",\"welding\",\"wire\"],\"articleSection\":[\"Knowledge\",\"Welding Safety\"],\"inLanguage\":\"fr-FR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/\",\"name\":\"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12) - ZMDE Steel Machinery\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/man-with-weld-gun.webp\",\"datePublished\":\"2026-01-22T06:30:41+00:00\",\"dateModified\":\"2026-05-06T01:34:02+00:00\",\"description\":\"Install MIG torch liner by rotating cable clockwise (arrow direction) while pushing; trim new contact tips to proper length (7\u201314 mm protrusion based on 3\u20136 m cable) and smooth ends. Essential steps for reliable wire feeding. WeldSafe Essentials #12\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/man-with-weld-gun.webp\",\"contentUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/man-with-weld-gun.webp\",\"width\":811,\"height\":540},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.zmdetech.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#website\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/\",\"name\":\"ZMDE Steel Machinery\",\"description\":\"Make Buildings Manufactured in Factory\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.zmdetech.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#organization\",\"name\":\"ZMDE Steel Machinery\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/websitelogo3.webp\",\"contentUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/websitelogo3.webp\",\"width\":200,\"height\":64,\"caption\":\"ZMDE Steel Machinery\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/facebook.com\\\/zmdemachinery\",\"https:\\\/\\\/x.com\\\/zmdemachinery\",\"https:\\\/\\\/www.youtube.com\\\/@ZMDE-TECH\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/zmde-tech\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/person\\\/96fc127d8fb2582a2873adc1bef0492d\",\"name\":\"ZMDE\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/893fee33ab156b1efff8e22257b31f5307ec509bcb7192a6bd7cd62bff7f443d?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/893fee33ab156b1efff8e22257b31f5307ec509bcb7192a6bd7cd62bff7f443d?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/893fee33ab156b1efff8e22257b31f5307ec509bcb7192a6bd7cd62bff7f443d?s=96&d=mm&r=g\",\"caption\":\"ZMDE\"},\"sameAs\":[\"https:\\\/\\\/www.zmdetech.com\"],\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/fr\\\/author\\\/athen_aizmde\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"S\u00e9curit\u00e9 en soudage : Installation de la gaine et r\u00e9glage de la saillie de la pointe de contact - R\u00e9glage pr\u00e9cis pour une alimentation en douceur (WeldSafe Essentials 12) - ZMDE Steel Machinery","description":"Installez le rev\u00eatement de la torche MIG en faisant tourner le c\u00e2ble dans le sens des aiguilles d'une montre (sens de la fl\u00e8che) tout en le poussant ; coupez les nouvelles pointes de contact \u00e0 la bonne longueur (7-14 mm de saillie pour un c\u00e2ble de 3-6 m) et lissez les extr\u00e9mit\u00e9s. Etapes essentielles pour un d\u00e9vidage fiable du fil. WeldSafe Essentials #12","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.zmdetech.com\/fr\/connaissances\/securite-du-soudage-installation-de-la-gaine-et-reglage-de-la-saillie-de-la-pointe-de-contact-reglage-precis-pour-une-alimentation-en-douceur-weldsafe-essentials-12\/","og_locale":"fr_FR","og_type":"article","og_title":"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12)","og_description":"Install MIG torch liner by rotating cable clockwise (arrow direction) while pushing; trim new contact tips to proper length (7\u201314 mm protrusion based on 3\u20136 m cable) and smooth ends. Essential steps for reliable wire feeding. WeldSafe Essentials #12","og_url":"https:\/\/www.zmdetech.com\/fr\/connaissances\/securite-du-soudage-installation-de-la-gaine-et-reglage-de-la-saillie-de-la-pointe-de-contact-reglage-precis-pour-une-alimentation-en-douceur-weldsafe-essentials-12\/","og_site_name":"ZMDE Steel Machinery","article_publisher":"https:\/\/facebook.com\/zmdemachinery","article_published_time":"2026-01-22T06:30:41+00:00","article_modified_time":"2026-05-06T01:34:02+00:00","og_image":[{"width":811,"height":540,"url":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/man-with-weld-gun.webp","type":"image\/webp"}],"author":"ZMDE","twitter_card":"summary_large_image","twitter_creator":"@zmdemachinery","twitter_site":"@zmdemachinery","twitter_misc":{"\u00c9crit par":"ZMDE","Dur\u00e9e de lecture estim\u00e9e":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#article","isPartOf":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/"},"author":{"name":"ZMDE","@id":"https:\/\/www.zmdetech.com\/#\/schema\/person\/96fc127d8fb2582a2873adc1bef0492d"},"headline":"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12)","datePublished":"2026-01-22T06:30:41+00:00","dateModified":"2026-05-06T01:34:02+00:00","mainEntityOfPage":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/"},"wordCount":432,"publisher":{"@id":"https:\/\/www.zmdetech.com\/#organization"},"image":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/man-with-weld-gun.webp","keywords":["carbon monoxide","CO2","Electrocution","Environment","Essentials","grounding","liner","Location","MAG","MIG","oxygen deficiency","Power Cabinet","Power Supply","Prevention","Protection","safety","tape","TIG","tutorial","weld","welder","welding","wire"],"articleSection":["Knowledge","Welding Safety"],"inLanguage":"fr-FR"},{"@type":"WebPage","@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/","url":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/","name":"S\u00e9curit\u00e9 en soudage : Installation de la gaine et r\u00e9glage de la saillie de la pointe de contact - R\u00e9glage pr\u00e9cis pour une alimentation en douceur (WeldSafe Essentials 12) - ZMDE Steel Machinery","isPartOf":{"@id":"https:\/\/www.zmdetech.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#primaryimage"},"image":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/man-with-weld-gun.webp","datePublished":"2026-01-22T06:30:41+00:00","dateModified":"2026-05-06T01:34:02+00:00","description":"Installez le rev\u00eatement de la torche MIG en faisant tourner le c\u00e2ble dans le sens des aiguilles d'une montre (sens de la fl\u00e8che) tout en le poussant ; coupez les nouvelles pointes de contact \u00e0 la bonne longueur (7-14 mm de saillie pour un c\u00e2ble de 3-6 m) et lissez les extr\u00e9mit\u00e9s. Etapes essentielles pour un d\u00e9vidage fiable du fil. WeldSafe Essentials #12","breadcrumb":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#primaryimage","url":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/man-with-weld-gun.webp","contentUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/man-with-weld-gun.webp","width":811,"height":540},{"@type":"BreadcrumbList","@id":"https:\/\/www.zmdetech.com\/knowledge\/welding-safety-installing-the-liner-and-setting-contact-tip-protrusion-precise-setup-for-smooth-feeding-weldsafe-essentials-12\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.zmdetech.com\/"},{"@type":"ListItem","position":2,"name":"Welding Safety: Installing the Liner and Setting Contact Tip Protrusion \u2013 Precise Setup for Smooth Feeding (WeldSafe Essentials 12)"}]},{"@type":"WebSite","@id":"https:\/\/www.zmdetech.com\/#website","url":"https:\/\/www.zmdetech.com\/","name":"ZMDE Steel Machinery","description":"Construire des b\u00e2timents fabriqu\u00e9s en usine","publisher":{"@id":"https:\/\/www.zmdetech.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.zmdetech.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.zmdetech.com\/#organization","name":"ZMDE Steel Machinery","url":"https:\/\/www.zmdetech.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.zmdetech.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/websitelogo3.webp","contentUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/websitelogo3.webp","width":200,"height":64,"caption":"ZMDE Steel Machinery"},"image":{"@id":"https:\/\/www.zmdetech.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/facebook.com\/zmdemachinery","https:\/\/x.com\/zmdemachinery","https:\/\/www.youtube.com\/@ZMDE-TECH","https:\/\/www.linkedin.com\/company\/zmde-tech"]},{"@type":"Person","@id":"https:\/\/www.zmdetech.com\/#\/schema\/person\/96fc127d8fb2582a2873adc1bef0492d","name":"ZMDE","image":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/secure.gravatar.com\/avatar\/893fee33ab156b1efff8e22257b31f5307ec509bcb7192a6bd7cd62bff7f443d?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/893fee33ab156b1efff8e22257b31f5307ec509bcb7192a6bd7cd62bff7f443d?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/893fee33ab156b1efff8e22257b31f5307ec509bcb7192a6bd7cd62bff7f443d?s=96&d=mm&r=g","caption":"ZMDE"},"sameAs":["https:\/\/www.zmdetech.com"],"url":"https:\/\/www.zmdetech.com\/fr\/author\/athen_aizmde\/"}]}},"_links":{"self":[{"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/posts\/18945","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/comments?post=18945"}],"version-history":[{"count":1,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/posts\/18945\/revisions"}],"predecessor-version":[{"id":18952,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/posts\/18945\/revisions\/18952"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/media\/18951"}],"wp:attachment":[{"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/media?parent=18945"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/categories?post=18945"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.zmdetech.com\/fr\/wp-json\/wp\/v2\/tags?post=18945"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}