{"id":19606,"date":"2026-06-30T10:19:02","date_gmt":"2026-06-30T10:19:02","guid":{"rendered":"https:\/\/www.zmdetech.com\/?p=19606"},"modified":"2026-06-30T10:19:02","modified_gmt":"2026-06-30T10:19:02","slug":"hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine","status":"publish","type":"post","link":"https:\/\/www.zmdetech.com\/ru\/%d0%b7%d0%bd%d0%b0%d0%bd%d0%b8%d1%8f\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/","title":{"rendered":"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine"},"content":{"rendered":"

Introduction<\/h2>\n

In H beam production, welding distortion is one of the most difficult quality variables to control. After the web plate and flange plates are joined by fillet welds, thermal stress causes the flanges to tilt inward \u2014 a deformation known as angular distortion. How efficiently and accurately this distortion is corrected determines the quality ceiling and throughput capacity of the entire production line.<\/p>\n

Cold straightening has long been the dominant correction method, but its limitations in energy consumption, precision, and equipment wear have driven the industry toward a better solution. The hot welding hot straightening process<\/strong> fundamentally changes the logic of distortion correction \u2014 rather than waiting for the steel to cool and then forcing it back into shape, correction is applied during the optimal temperature window immediately after welding, achieving better results with significantly less force.<\/p>\n

This article examines the physical basis, process logic, and practical advantages of the hot welding hot straightening process across four dimensions: the mechanics of welding distortion, the relationship between steel temperature and mechanical properties, a comparison with cold straightening, and how the process is implemented on a 3-in-1 integrated machine.<\/p>\n

 <\/p>\n

Quick Comparison<\/h2>\n\n\n\n\n\n\n\n\n\n
Dimension<\/td>\nCold Straightening<\/td>\nHot Welding Hot Straightening<\/td>\n<\/tr>\n
Correction force required<\/td>\nHigh<\/td>\nReduced by approximately 30\u201340%<\/td>\n<\/tr>\n
Dimensional accuracy<\/td>\nAffected by springback, lower batch consistency<\/td>\nMinimal springback, high batch consistency<\/td>\n<\/tr>\n
Straightening roll wear<\/td>\nFast, shorter replacement cycle<\/td>\nSlower, extended service life<\/td>\n<\/tr>\n
Energy consumption<\/td>\nHigh<\/td>\nLower<\/td>\n<\/tr>\n
Operator skill dependency<\/td>\nHigh \u2014 experience needed to compensate for springback<\/td>\nLower \u2014 parameter-controlled<\/td>\n<\/tr>\n
Best application<\/td>\nOffline correction, existing inventory<\/td>\nContinuous in-line production<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Understanding the Mechanics of Welding Distortion<\/h2>\n

To appreciate the value of the hot straightening process, it helps to first understand how welding distortion is generated.<\/p>\n

 <\/p>\n

How Residual Stress Forms<\/h3>\n

During H beam welding, the weld zone metal is heated to a molten state while the surrounding base material remains at a relatively lower temperature. As the weld cools and contracts, it is constrained by the cooler surrounding material and cannot contract freely. This creates residual stress in the weld zone and heat-affected zone, distributed unevenly across the cross-section. The result is that the flange plates tilt toward the web \u2014 the angular distortion that straightening is designed to correct.<\/p>\n

 <\/p>\n

Factors That Influence Distortion<\/h3>\n

The degree of angular distortion is influenced by several factors: welding heat input, the thickness ratio between flange and web plates, whether welding is performed on one side first or simultaneously on both sides, and the clamping and support conditions during welding. Understanding these factors clarifies why the timing of straightening \u2014 immediately after welding versus after full cooling \u2014 makes such a significant difference to the correction outcome.<\/p>\n

 <\/p>\n

Steel Temperature and Mechanical Properties<\/h2>\n

The hot welding hot straightening process is grounded in a fundamental physical property of steel: yield strength decreases as temperature increases. This is the physical basis for the entire process logic.<\/p>\n

 <\/p>\n

The Temperature-Yield Strength Relationship<\/h3>\n

At room temperature, common structural steels such as Q235 and Q345 have yield strengths in the range of 235\u2013345 MPa. As temperature rises into the 200\u2013400\u00b0C range, yield strength begins to decline noticeably. In the 600\u2013700\u00b0C range, yield strength can fall to 30\u201350% of the room temperature value.<\/p>\n

This means that applying a correction force while the steel is still at elevated temperature requires far less mechanical force to produce the same plastic deformation \u2014 and the corrected shape is retained once the steel cools.<\/p>\n

 <\/p>\n

The Hot Straightening Window<\/h3>\n

After welding is complete, steel temperature follows a gradient distribution outward from the weld zone and decreases continuously over time. The hot welding hot straightening process operates within the window where the steel is still at a meaningfully elevated temperature \u2014 typically within several minutes to roughly fifteen minutes after welding completes, depending on the beam specification, welding parameters, and ambient conditions.<\/p>\n

Within this window, three conditions favor correction: yield strength is below the cold-state value, reducing the force required; ductility is higher, producing more uniform deformation without localized stress concentrations; and residual stresses have not fully stabilized, making the corrected geometry more durable.<\/p>\n

Once this window closes and the steel approaches room temperature, the force required for correction rises sharply \u2014 and the limitations of cold straightening become unavoidable.<\/p>\n

 <\/p>\n

Hot Straightening vs Cold Straightening<\/h2>\n

Correction Force and Equipment Load<\/h3>\n

Cold straightening requires substantial hydraulic force to produce plastic deformation in fully cooled steel. This places high demands on the hydraulic system capacity and structural strength of the straightening equipment, driving up both equipment cost and energy consumption per cycle.<\/p>\n

Hot straightening reduces the required correction force by approximately 30\u201340% compared to cold correction at equivalent beam specifications. This reduction lowers the hydraulic system load, reduces peak stress on the straightening rolls, and decreases energy consumption per piece \u2014 all without sacrificing correction quality.<\/p>\n

 <\/p>\n

Precision and Batch Consistency<\/h3>\n

A persistent limitation of cold straightening is springback. Steel at room temperature has a high elastic modulus, meaning a portion of the applied deformation recovers elastically once the correction force is released. To achieve the target geometry after springback, the applied correction must overshoot the target \u2014 a judgment call that depends on operator experience and varies between pieces.<\/p>\n

Hot straightening produces significantly less springback. The combination of lower yield strength and reduced elastic modulus at elevated temperature means the corrected geometry is closer to the applied correction, and the shape is retained more reliably after the force is released. Flange perpendicularity pass rates and batch-to-batch dimensional consistency are both meaningfully higher compared to cold straightening, particularly in high-volume production with concentrated beam specifications.<\/p>\n

 <\/p>\n

Straightening Roll Service Life<\/h3>\n

Straightening rolls are the primary wear component in any correction mechanism. The higher forces required by cold straightening accelerate roll wear, shorten replacement intervals, and increase annual maintenance costs. The reduced correction forces in hot straightening produce a more favorable load profile on the rolls, extending their service life and reducing the frequency and cost of replacement.<\/p>\n

 <\/p>\n

Implementation on the 3-in-1 Integrated Machine<\/h2>\n

The hot welding hot straightening process only delivers its full advantage when welding and straightening are immediately sequential<\/strong> \u2014 with no cooling interval between the two stages. This is precisely where the 3-in-1 integrated machine provides a structural advantage that separate machine configurations cannot replicate.<\/p>\n

 <\/p>\n

The Problem with Separate Machines<\/h3>\n

In a separate machine layout, the workpiece must be crane-transferred from the welding machine to the standalone straightening machine after welding is complete. During this transfer \u2014 hooking, moving, landing, repositioning \u2014 the steel cools continuously. By the time the piece reaches the straightening station, the hot straightening window has typically closed, and the operation defaults to cold correction regardless of intent.<\/p>\n

 <\/p>\n

How the Integrated Line Solves It<\/h3>\n

The 3-in-1 machine integrates the welding station and straightening station within a single continuous line. After welding, the workpiece advances directly to the straightening mechanism without any crane transfer. The distance between the two stations and the workpiece feed rate are engineered to ensure the steel arrives at the straightening mechanism within the effective hot straightening temperature range.<\/p>\n

This immediate sequential integration is what converts the theoretical advantage of hot straightening into a consistent, repeatable production outcome. It is not possible to achieve genuine hot straightening with a standalone straightening machine \u2014 the process depends on the physical configuration of the integrated line.<\/p>\n

 <\/p>\n

Applicable Scenarios and Limitations<\/h2>\n

The hot welding hot straightening process delivers its strongest results in specific production contexts, and has limitations worth understanding before specifying equipment.<\/p>\n

 <\/p>\n

Where It Performs Best<\/h3>\n

High-volume continuous production with a concentrated beam specification range is where hot straightening delivers the clearest advantages \u2014 consistent parameters, repeatable results, and low correction force requirements combine to produce stable quality at low operating cost. Operations with strict flange perpendicularity tolerances, such as bridge fabrication or heavy industrial facility construction, also benefit significantly from the higher dimensional consistency that hot straightening provides.<\/p>\n

 <\/p>\n

Limitations to Consider<\/h3>\n

Hot straightening is only achievable through an integrated machine configuration \u2014 a standalone straightening machine physically cannot maintain the steel in the hot straightening window after a crane transfer. For previously welded beams that have fully cooled, cold correction remains the only available option. Additionally, high-strength steels have different temperature-property profiles than standard structural steels and may require adjusted parameters and process validation before hot straightening is applied.<\/p>\n

 <\/p>\n

Conclusion<\/h2>\n

The logic of the hot welding hot straightening process is straightforward: it applies the physical fact that steel yield strength decreases at elevated temperature, correcting distortion at the moment when the least force is required and the best results are achievable. The technical challenge lies in building a production system where welding and straightening are immediately sequential \u2014 and that is the core process engineering value of the 3-in-1 integrated machine configuration.<\/p>\n

If you are evaluating straightening options for an H beam production line or want to understand how the hot straightening process applies to your specific beam specifications, contact the ZMDE<\/strong> technical team<\/a> for detailed guidance.<\/p>\n","protected":false},"excerpt":{"rendered":"

Introduction In H beam production, welding distortion is one of the most difficult quality variables to control. After the web plate and flange plates are joined by fillet welds, thermal stress causes the flanges to tilt inward \u2014 a deformation known as angular distortion. How efficiently and accurately this distortion is corrected determines the quality […]<\/p>\n","protected":false},"author":8,"featured_media":19608,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[181],"tags":[],"class_list":["post-19606","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-knowledge"],"yoast_head":"\nHot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine - ZMDE Steel Machinery<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.zmdetech.com\/ru\/\u0437\u043d\u0430\u043d\u0438\u044f\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/\" \/>\n<meta property=\"og:locale\" content=\"ru_RU\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine\" \/>\n<meta property=\"og:description\" content=\"Introduction In H beam production, welding distortion is one of the most difficult quality variables to control. After the web plate and flange plates are joined by fillet welds, thermal stress causes the flanges to tilt inward \u2014 a deformation known as angular distortion. How efficiently and accurately this distortion is corrected determines the quality […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.zmdetech.com\/ru\/\u0437\u043d\u0430\u043d\u0438\u044f\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/\" \/>\n<meta property=\"og:site_name\" content=\"ZMDE Steel Machinery\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/facebook.com\/zmdemachinery\" \/>\n<meta property=\"article:published_time\" content=\"2026-06-30T10:19:02+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.zmdetech.com\/wp-content\/uploads\/professional-welder-welding-structural-steel.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1672\" \/>\n\t<meta property=\"og:image:height\" content=\"941\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"Qiaoguoling\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@zmdemachinery\" \/>\n<meta name=\"twitter:site\" content=\"@zmdemachinery\" \/>\n<meta name=\"twitter:label1\" content=\"\u041d\u0430\u043f\u0438\u0441\u0430\u043d\u043e \u0430\u0432\u0442\u043e\u0440\u043e\u043c\" \/>\n\t<meta name=\"twitter:data1\" content=\"Qiaoguoling\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u041f\u0440\u0438\u043c\u0435\u0440\u043d\u043e\u0435 \u0432\u0440\u0435\u043c\u044f \u0434\u043b\u044f \u0447\u0442\u0435\u043d\u0438\u044f\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 \u043c\u0438\u043d\u0443\u0442\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/\"},\"author\":{\"name\":\"Qiaoguoling\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/person\\\/c1ceaa094c5b28f7b930121f3bee1b61\"},\"headline\":\"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine\",\"datePublished\":\"2026-06-30T10:19:02+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/\"},\"wordCount\":1486,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/professional-welder-welding-structural-steel.webp\",\"articleSection\":[\"Knowledge\"],\"inLanguage\":\"ru-RU\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/\",\"name\":\"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine - ZMDE Steel Machinery\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/professional-welder-welding-structural-steel.webp\",\"datePublished\":\"2026-06-30T10:19:02+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#breadcrumb\"},\"inLanguage\":\"ru-RU\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ru-RU\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/professional-welder-welding-structural-steel.webp\",\"contentUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/professional-welder-welding-structural-steel.webp\",\"width\":1672,\"height\":941,\"caption\":\"Professional welder welding structural steel in an industrial fabrication workshop ZMDE\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/knowledge\\\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.zmdetech.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#website\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/\",\"name\":\"ZMDE Steel Machinery\",\"description\":\"Make Buildings Manufactured in Factory\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.zmdetech.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ru-RU\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#organization\",\"name\":\"ZMDE Steel Machinery\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ru-RU\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/websitelogo3.webp\",\"contentUrl\":\"https:\\\/\\\/www.zmdetech.com\\\/wp-content\\\/uploads\\\/websitelogo3.webp\",\"width\":200,\"height\":64,\"caption\":\"ZMDE Steel Machinery\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/facebook.com\\\/zmdemachinery\",\"https:\\\/\\\/x.com\\\/zmdemachinery\",\"https:\\\/\\\/www.youtube.com\\\/@ZMDE-TECH\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/zmde-tech\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.zmdetech.com\\\/#\\\/schema\\\/person\\\/c1ceaa094c5b28f7b930121f3bee1b61\",\"name\":\"Qiaoguoling\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ru-RU\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/a40a9ac84b00984fb2544207b4dcb6d0f83ae7087f94340ed0068292da64f028?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/a40a9ac84b00984fb2544207b4dcb6d0f83ae7087f94340ed0068292da64f028?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/a40a9ac84b00984fb2544207b4dcb6d0f83ae7087f94340ed0068292da64f028?s=96&d=mm&r=g\",\"caption\":\"Qiaoguoling\"},\"url\":\"https:\\\/\\\/www.zmdetech.com\\\/ru\\\/author\\\/qiaoguoling\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine - ZMDE Steel Machinery","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.zmdetech.com\/ru\/\u0437\u043d\u0430\u043d\u0438\u044f\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/","og_locale":"ru_RU","og_type":"article","og_title":"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine","og_description":"Introduction In H beam production, welding distortion is one of the most difficult quality variables to control. After the web plate and flange plates are joined by fillet welds, thermal stress causes the flanges to tilt inward \u2014 a deformation known as angular distortion. How efficiently and accurately this distortion is corrected determines the quality […]","og_url":"https:\/\/www.zmdetech.com\/ru\/\u0437\u043d\u0430\u043d\u0438\u044f\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/","og_site_name":"ZMDE Steel Machinery","article_publisher":"https:\/\/facebook.com\/zmdemachinery","article_published_time":"2026-06-30T10:19:02+00:00","og_image":[{"width":1672,"height":941,"url":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/professional-welder-welding-structural-steel.webp","type":"image\/webp"}],"author":"Qiaoguoling","twitter_card":"summary_large_image","twitter_creator":"@zmdemachinery","twitter_site":"@zmdemachinery","twitter_misc":{"\u041d\u0430\u043f\u0438\u0441\u0430\u043d\u043e \u0430\u0432\u0442\u043e\u0440\u043e\u043c":"Qiaoguoling","\u041f\u0440\u0438\u043c\u0435\u0440\u043d\u043e\u0435 \u0432\u0440\u0435\u043c\u044f \u0434\u043b\u044f \u0447\u0442\u0435\u043d\u0438\u044f":"7 \u043c\u0438\u043d\u0443\u0442"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#article","isPartOf":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/"},"author":{"name":"Qiaoguoling","@id":"https:\/\/www.zmdetech.com\/#\/schema\/person\/c1ceaa094c5b28f7b930121f3bee1b61"},"headline":"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine","datePublished":"2026-06-30T10:19:02+00:00","mainEntityOfPage":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/"},"wordCount":1486,"commentCount":0,"publisher":{"@id":"https:\/\/www.zmdetech.com\/#organization"},"image":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/professional-welder-welding-structural-steel.webp","articleSection":["Knowledge"],"inLanguage":"ru-RU","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/","url":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/","name":"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine - ZMDE Steel Machinery","isPartOf":{"@id":"https:\/\/www.zmdetech.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#primaryimage"},"image":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/professional-welder-welding-structural-steel.webp","datePublished":"2026-06-30T10:19:02+00:00","breadcrumb":{"@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#breadcrumb"},"inLanguage":"ru-RU","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/"]}]},{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#primaryimage","url":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/professional-welder-welding-structural-steel.webp","contentUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/professional-welder-welding-structural-steel.webp","width":1672,"height":941,"caption":"Professional welder welding structural steel in an industrial fabrication workshop ZMDE"},{"@type":"BreadcrumbList","@id":"https:\/\/www.zmdetech.com\/knowledge\/hot-welding-and-hot-straightening-the-core-process-technology-inside-the-3-in-1-machine\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.zmdetech.com\/"},{"@type":"ListItem","position":2,"name":"Hot Welding and Hot Straightening: The Core Process Technology Inside the 3-in-1 Machine"}]},{"@type":"WebSite","@id":"https:\/\/www.zmdetech.com\/#website","url":"https:\/\/www.zmdetech.com\/","name":"\u0421\u0442\u0430\u043b\u044c\u043d\u043e\u0435 \u043e\u0431\u043e\u0440\u0443\u0434\u043e\u0432\u0430\u043d\u0438\u0435 ZMDE","description":"\u041f\u043e\u0441\u0442\u0440\u043e\u0439\u043a\u0438, \u0438\u0437\u0433\u043e\u0442\u043e\u0432\u043b\u0435\u043d\u043d\u044b\u0435 \u043d\u0430 \u0437\u0430\u0432\u043e\u0434\u0435","publisher":{"@id":"https:\/\/www.zmdetech.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.zmdetech.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ru-RU"},{"@type":"Organization","@id":"https:\/\/www.zmdetech.com\/#organization","name":"\u0421\u0442\u0430\u043b\u044c\u043d\u043e\u0435 \u043e\u0431\u043e\u0440\u0443\u0434\u043e\u0432\u0430\u043d\u0438\u0435 ZMDE","url":"https:\/\/www.zmdetech.com\/","logo":{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/www.zmdetech.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/websitelogo3.webp","contentUrl":"https:\/\/www.zmdetech.com\/wp-content\/uploads\/websitelogo3.webp","width":200,"height":64,"caption":"ZMDE Steel Machinery"},"image":{"@id":"https:\/\/www.zmdetech.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/facebook.com\/zmdemachinery","https:\/\/x.com\/zmdemachinery","https:\/\/www.youtube.com\/@ZMDE-TECH","https:\/\/www.linkedin.com\/company\/zmde-tech"]},{"@type":"Person","@id":"https:\/\/www.zmdetech.com\/#\/schema\/person\/c1ceaa094c5b28f7b930121f3bee1b61","name":"Qiaoguoling","image":{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/secure.gravatar.com\/avatar\/a40a9ac84b00984fb2544207b4dcb6d0f83ae7087f94340ed0068292da64f028?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/a40a9ac84b00984fb2544207b4dcb6d0f83ae7087f94340ed0068292da64f028?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/a40a9ac84b00984fb2544207b4dcb6d0f83ae7087f94340ed0068292da64f028?s=96&d=mm&r=g","caption":"Qiaoguoling"},"url":"https:\/\/www.zmdetech.com\/ru\/author\/qiaoguoling\/"}]}},"_links":{"self":[{"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/posts\/19606","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/comments?post=19606"}],"version-history":[{"count":1,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/posts\/19606\/revisions"}],"predecessor-version":[{"id":19607,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/posts\/19606\/revisions\/19607"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/media\/19608"}],"wp:attachment":[{"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/media?parent=19606"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/categories?post=19606"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.zmdetech.com\/ru\/wp-json\/wp\/v2\/tags?post=19606"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}